Гусеничный экскаватор Komatsu PC120

Komatsu PC120-6 excavator parameter configuration
specification
The working weight of the whole machine (kg) is 12030
Bucket capacity (m³) 0.5
Stick length (mm) 2100
Tonnage (tons) 12
Joint ventures/imports
Power: Traditional power
Bucket backhoe
Joint ventures/imports
Power: Traditional power
performance
Grounding specific pressure (Kpa) 0.39kg/c㎡
Rotational speed (rpm) 11
Travel speed (km/h) 2.7-5.5
Climbing ability (%) 70/30°
Bucket digging force (kN) 8800
Stick digging force (kN) 6300
dynamical system
Engine model Komatsu SAA4D95LE-3
Rated power (kw/rpm) 64/2200
Displacement (L) 3.26
Cooling method: Water cooling
Working type: direct injection, turbocharged, intercooled diesel engine
Hydraulic system
The maximum flow rate of the main pump (l/min) is 226L/min
Working hydraulic oil circuit (Mpa) 325kg/c㎡
Traveling hydraulic circuit (Mpa) 355kg/c㎡
Rotary hydraulic circuit (Mpa) 295kg/c㎡
Control hydraulic circuit (Mpa) 30kg/c㎡
Whether the hydraulic crushing pipeline is standard or not
Oil capacity
Fuel tank (L) 247
Hydraulic Tank (L) 90
Engine oil change volume (L) 11
Coolant (L) 13.4
Body size
Total length of transport (mm) 7599
Total height of transport (mm) 2175
Cab total height (mm) 2175
Counterweight ground clearance (mm) 855
Track grounding length (mm) 2880
Total track length (mm) 3610
Track shoe width (mm) 500
Track gauge (mm) 1990
Minimum ground clearance (mm) 400
Rear end turning radius (mm) 2110
Scope of work
Maximum digging radius (mm) 8290
The maximum excavation radius of the stopping surface (mm) is 8170
Maximum digging depth (mm) 5520
Maximum digging height (mm) 8610
Maximum unloading height (mm) 6170
Maximum vertical digging depth (mm) 4940
Maximum effective digging depth (mm) 5315
There is no bulldozer shovel for lifting or pushing depth (mm).