Система контроля нагрузки Topcon Opus A6 для строительной техники

Topcon Opus A6
Basit Moment Kontrol Sistemi Ekranı


HOUSING
Orientation landscape or portrait
W267 x H144 x D69,5 mm
excl. connector and cables
MEMORY
512 MB DDR2 RAM
4 GB NAND flash
POWER SUPPLY
9 ... 36 V DC
PROGRAMMING ENVIRONMENT
OPUS Projektor
Codesys-Tools (3.5)
ISO-VT
C/C++
DISPLAY
7", 15:9 TFT transmissive
800 x 480 px, 500 cd/m²
Contrast ratio 600:1"
USER INTERFACE
12 softkeys
4 hardkeys
Encoder
Touchscreen
OPERATING SYSTEM
Linux Kernel 3.0.0 or higher
SUPPORTED PROTOCOLS
CANopen®
CANfreestyle
J1939
SIGNALS
Light sensor
Multicolor-LED
3 status-LED’s
Speaker, approx. 80 dB(A)
INTERFACES
2 x CANbus ISO 11898
CAN specification 2.0 B active
Ethernet 10/100 Mbit/s Base T
1x RS232 (only RxD, TxD, GND)
Analog/Digital I/O:
4 analog/digital inputs,
3 digital outputs
1 USB 2.0 high speed on main connector
1 USB 2.0 high speed on front
REAL TIME CLOCK
Buffered by gold cap
CERTIFICATES
CE mark
E1 Type approval
PROCESSOR
32-bit, 800 MHz
Freescale® I.MX6™
VIDEO
Inputs: 3x analog
Vss: 1 V
Camera supply: 12 VDC
Max. current: 500 mA
Output: 1x camera control output, Ampacity: 300 mA
ENVIRONMENTAL CONDITIONS
Temperatures:
operating -30° to +65°C
storage -40° to +85°C
Protection: IP 65 and IP 66
Mechanical Shock: Level 2
Random Vibration: Level 2
Sinusoidal Vibration: Level 2
CONNECTORS
Main: AMP Seal, 26 pin
Video: M12 round, 5 pole, B-coded
Ethernet: M12 round, 4 pole, D-coded